|
Walther PPK/S (Umarex) |
|
 |
Walther PPK/S (.380 ACP) |
|
Info: Manufacturer/Model: Umarex, Walther PPK/S Replica Of: Walther PPK/S (.380 ACP) Made In: Japan Caliber/Ammunition/Feed: 177, steel BB, 15-shot magazine Air Source: CO2, 12 g Powerlet Accessories: None Recommended Pellet or BB: Crosman Copperhead BB Weight (lb)/Length (in): 1.2, 6.25 Body Material/Finish/Grips: metal, blued, plastic Barrel Length (in)/Material/Rifled: 3.5, steel, no Trigger Action: SA Trigger Pull (lbs)/Adjustable: 3.25 (SA), no Sights (front/rear): fixed, fixed Velocity (fps): 295 Sounds Level (dB): 96 Thickness of Pellet Holder (in): N/A Manufactured Dates: 2000 - present Condition/Manual/Box: 95%, yes, yes (backer card) Serial Number: 5K04178 |
Comments:
This excellent replica by Umarex of the Walther PPK/S has true semi-auto
operation with blowback action. This gun feels very good in hand
and simulates the firearm right down to the slide staying open
after the last shot is taken. With its short unrifled barrel,
accuracy is not very good. Shot velocity, although not very
high, is very consistent for the first 25 shots. This is probably one of the
most fun to shoot plinkers ever made. It is good enough, in fact,
that the NRA has chosen it for its youth handgun training
program. Pyramyd Air Report on Walther PPK/S.
Performance:
Measurements were made on
8/10/06 at a temperature of 82 ºF and 14' elevation. A ten shot
string was fired from a bench rest at 15' using Crosman
Copperhead BBs (5.1 gr). The highest velocity measured was 294
fps, the lowest was 288 fps (average of the 10-shot string was
290 fps). A five shot string
fired with open sights grouped at 1.88". Click the thumbnail below to see a
larger image.
Click
here for a description of the measurement methods. |
 |
Right Profile: |
 |
Front View: |
 |
Right Side Markings: |
 |
Left Side Markings: |
 |
Loading BBs: The 15-shot spring-loaded plastic magazine is a little fragile. Get several if you plan to do a lot of high-speed shooting. |
 |
Loading CO2: |
|
|
Packaging: |
Copyright © 2011