| Walther CP88 Competition | |
 |
Walther P88 Champion
(9 mm) |
|
Info: Manufacturer/Model: Walther CP88 Competition (Umarex) Replica Of: Walther P88 Champion (9 mm) Made In: Germany Caliber/Ammunition/Feed: 177, lead pellet, 8-shot clip Air Source: CO2, 12 g Powerlet Accessories: Fully adjustable competition sights Recommended Pellet or BB: RWS R-10 (7.0 gr) Weight (lb)/Length (in): 2.5, 9.0 Body Material/Finish/Grips: metal, nickel, plastic Barrel Length (in)/Material/Rifled: 6, steel, yes Trigger Action: DA/SA Trigger Pull (lbs)/Adjustable: 9.0 (DA), 5.75 (SA), no Sights (front/rear): fixed, fully adjustable Velocity (fps): 426 Sound Level (dB): 100 Thickness of Pellet Holder (in): 0.275 Manufactured Dates: 1995 - present Condition/Manual/Box: 95%, yes, yes Serial Number: A6386094 |
Comments:
Very well built and good
accuracy with the 6" barrel. The left-side slide release lever
is a little difficult to operate, similar to the RWS C225. The
competition open sights provide full adjustments for elevation
and windage. The sights that normally come with this gun are
fixed in the front and adjustable only for windage in the rear.
I find the grip to be a little short for my hand making the
balance seem barrel-heavy. In double-action mode, the trigger
seems fairly heavy which affects accuracy. Pyramyd Air Report on the Walther CP88.
Performance:
Measurements were made on
7/13/06 at a temperature of 82 ºF and 14' elevation. A ten shot string was fired
from a bench rest at 15' using RWS R-10 pellets (7.0 gr).
The highest velocity measured was 461 fps, the lowest was 406 fps
(average of the 10-shot string was 418 fps). A Walther competition
red-dot sight was mounted on the CP88 and a seven shot string
grouped at just under 1/4". Click the thumbnail below to see a
larger image.
Click
here for a description of the measurement methods. |
 |
Right Profile: |
 |
Front View: |
 |
Right Side Markings: |
 |
Left Side Markings: |
 |
Loading Pellets: |
 |
Loading CO2: |
|
|
Packaging: |
Copyright © 2006