|
Firepower 301 M84 (Cybergun) |
|
 |
Beretta M-84 Cheetah
(.380 ACP) |
|
Info: Manufacturer/Model: Made in Taiwan by Wingun for Cybergun (distributed in U.S. by Palco Sports), Firepower 301 M84 Replica Of: Beretta M-84 Cheetah (.380 ACP) Made In: Taiwan Caliber/Ammunition/Feed: 177, steel BBs, 20-shot magazine Air Source: CO2, 12 g Powerlet Accessories: None Recommended Pellet or BB: Daisy Avanti BBs (5.5 gr) Weight (lb)/Length (in): 1.6, 6.75 Body Material/Finish/Grips: metal, black, plastic Barrel Length (in)/Material/Rifled: 4.0, steel, no Trigger Action: DA (only) Trigger Pull (lbs)/Adjustable: 11.8 (DA), no Sights (front/rear): fixed, fixed Velocity (fps): not specified by manufacturer Sound Level (dB): 100 Thickness of Pellet Holder (in): N/A Manufactured Dates: 2006-2010 Condition/Manual/Box: 98%, yes, yes Serial Number: 06E11843
|
Comments:
The M84 is an all-metal
replica of the Beretta Cheetah. It is made in Taiwan by Wingun for
Cybergun and distributed in the USA by Palco
Sports (a large distributor of airsoft products) under their
Firepower label . This pistol is
similar to the Anics A-101 and A-111 in that it is made entirely
of metal, has a removable BB magazine, has a heavy trigger pull,
and uses a moving barrel hammer mechanism. The finish and
attention to detail are better on the M84 than on either of the
Russian pistols. The M84 is a sturdy action plinker with good
power and accuracy but is hindered somewhat by a heavy trigger
and non-adjustable sights.
Cybergun Brochure
(.pdf) Performance: Measurements were made on 2/01/07 at a temperature of 53 ºF and 14' elevation. A ten shot string was fired from a bench rest at 15' using Daisy Avanti BBs (5.5 gr). The highest velocity measured was 446 fps, the lowest was 436 fps (average of the 10-shot string was 442 fps). A six shot string fired with open sights grouped at 0.69". Click the thumbnail below to see a larger image. Click here for a description of the measurement methods.
|
 |
Right Profile: |
 |
Front View: The slide is fixed in place and the slide lock lever and hammer are props. The magazine release button is just behind the trigger on the left side. |
 |
Right Side Markings: The safety is shown just above the trigger on the right side. On this particular specimen, the safety is difficult to engage. |
 |
Left Side Markings: |
 |
Loading BBs: The magazine is made from metal and holds 20 steel
BBs. The BBs load in a staggered fashion, similar to the
"double-stack" magazines of airsoft pistols.
|
 |
Loading CO2: The grip cover is a one-piece unit that slides back on forth to reveal the CO2 cylinder and piercing mechanism. |
 |
Packaging: |
Copyright © 2011